Accessories
- Low profile base
- Compatible with the entire Wizmart range
- Necessary for the detector installation
- Easy mounting mark
- Compatible with action indicator light
incl. VAT€1,80
50+ on stock
- High profile base supplement
- Compatible with the base DMT-B9000
- Necessary for the detector installation
- Easy mounting mark
- Possibility of locking the detector to the base
- Compatible with action indicator light
incl. VAT€1,84
50+ on stock
- Low profile base
- Compatible with the entire DMTech range
- Necessary for the detector installation
- Easy mounting mark
- Possibility of locking the detector to the base
- Compatible with action indicator light
incl. VAT€2,45
50+ on stock
- High base of 22mm
- Compatible with the entire Wizmart range
- Necessary for the detector installation
- Easy mounting mark
- Compatible with action indicator light
incl. VAT€2,70
Out of stock
- Standard Base
- Compatible with the entire Advanced range
- Necessary for the detector installation
- Low profile
- Safe and reliable cable terminals
incl. VAT€3,83
50+ on stock
- Maxfire
- Red LED action signal light
- Specially for fire
- White ABS plastic
- Reduced dimensions
incl. VAT€4,78
50+ on stock
- Low profile base with relay
- Up to 12VDC 0.5A / Terminal NO/NC/C
- Compatible with the entire DMTech range
- Necessary for the detector installation
- Easy mounting mark
- Possibility of locking the detector to the base
- Compatible with action indicator light
incl. VAT€5,36
50+ on stock
- High profile base supplement
- Compatible with the base ADV-VB100
- Necessary for the detector installation
- Easy mounting mark
- Possibility of locking the detector to the base
- Compatible with action indicator light
incl. VAT€6,75
50+ on stock
- Plastic cover
- Compatible with Advanced pushbuttons
- ADV-20-VCP100 y ADV-20-SGCP100
incl. VAT€8,03
Out of stock
- Reset button
- Special for fire extinguishing panel
- Emergency stop
- Led indicator
- Recessed installation or surface
- Reset by hand or by key
incl. VAT€7,65
50+ on stock
- Reset button
- Special for fire extinguishing panel
- Manual extinction
- Led indicator
- Recessed installation or surface
- Reset by hand or by key
incl. VAT€7,65
50+ on stock
- Conventional resettable push button
- Certificate EN54
- Led indicator
- Recessed installation or surface
- Reset by hand or by key
incl. VAT€7,65
50+ on stock
- Reset button
- Special for fire extinguishing panel
- Manual Activation
- Led indicator
- Recessed installation or surface
- Reset by hand or by key
incl. VAT€7,65
50+ on stock
- DMTECH
- Wired siren for interior and exterior fire
- Loudness 96dB at 1m
- LED Flash
- Low base for easy installation
- Power supply 9~30 VDC
incl. VAT€8,42
50+ on stock
- DMTECH Communication Module
- Communication by RS485
- Centrally powered
- Necessary for installation of DMT-FP9000R
- Allows to connect the control units to a control repeater
incl. VAT€30,60
50+ on stock
- DMTECH coventional relay module
- 2 relay outputs
- Up to 3A/125VAC or 3A/30VDC
- Centrally powered
- Compatible with DMTECH fire panels
incl. VAT€30,60
Out of stock
- DMTECH coventional relay module
- 4 relay outputs
- Up to 3A/125VAC or 3A/30VDC
- Centrally powered
- Compatible with DMTECH fire panels
incl. VAT€32,13
50+ on stock
- Analog siren base
- Compatible with the entire Advanced range
- Necessary for the detector installation
- Can be configured up to 32 tones
- Safe and reliable cable terminals
incl. VAT€46,47
Out of stock
- Advanced Analog Module
- 1 monitored input
- Built-in short-circuit isolator
- Compatible with Argus Vega protocol
- Conductor cable up to 2.5mm2
- Certificate EN54-17
incl. VAT€48,20
Out of stock
- DMTECH coventional relay module
- 8 relay outputs
- Up to 3A/125VAC or 3A/30VDC
- Centrally powered
- Compatible with DMTECH fire panels
incl. VAT€41,31
50+ on stock
- Advanced Analog Module
- 1 relay output
- Built-in short-circuit isolator
- Compatible with Argus Vega protocol
- Conductor cable up to 2.5mm2
- Certificate EN54-17
incl. VAT€55,08
50+ on stock
