Infrared Barriers
An IR fence is an effective way to secure an area against illegal intrusion. It is especially good for securing mink farms, agriculture and other outdoor areas.
An IR fence consists of two parts which maintain multiple invisible and harmless laser beams between them. If several of the beams are broken, an internal relay is activated, which can then activate light, alarm or other.
When thieves or vandals crawl over the fence and into the monitored area, the IR fence is activated.
When the IR fence is activated, a call is automatically sent to the control center or to the supervisor of the area.
All IR fences have sabotage alarms. The diodes can be fine-tuned to the sides to ensure good connection. LEDs indicate the connection between transmitter and receiver. The IR fence can be made wireless if you do not want cables pulled into the ground.
We can help you protect your values and monitor your outdoor areas. Sevecu has supplied Infrared Barriers to many many industries all over EU. IR fences are approved by the insurance and therefore it is a small investment to secure the great values in your area.

- Barrier bracket
- Model T
- Stainless steel
- Compatible with detectors of 2 beams
- Compatible with AB-60
- 30cm

- Infrared barrier detector
- Wired | 1 beam
- Max distance. detection 10 / 20 m
- Smaller size and easy installation
- Relay
- Power supply 9~16VDC/VAC

- Infrared barrier detector
- Wired | 1 beam
- Max distance. detection 10 / 20 m
- Smaller size and easy installation
- Relay
- Power supply 12~24VDC/VAC

- Barrier bracket
- Model L
- Stainless steel
- Compatible with detectors of 2 beams
- Compatible with AB-60
- 30cm

- Barrier bracket
- Model L
- Stainless steel
- Compatible with detectors of 3/4 beams
- Compatible with ABE and ABH barriers
- 50cm

- Barrier bracket
- Model T
- Stainless steel
- Compatible with detectors of 3/4 beams
- Compatible with ABE and ABH barriers
- 50cm

- Solar infrared barrier receiver
- 2 wireless inputs
- 2 wired outputs
- Up to 6 devices per input
- Dip Switch configuration

- Infrared barrier detector
- Wired | 2 beams
- Max distance. detection 60 / 180 m
- High configuration capacity
- Tamper | Relay Outputs | LED Display
- Power supply 12~24VDC/VAC

- Infrared barrier detector
- Wired | 4 beams
- Max distance. The detection 30 m
- Easy installation with LED and buzzer
- NC/NO relay outputs
- Power supply 12~18VDC

- Solar infrared barrier receiver
- 4 wireless inputs
- 4 wired outputs
- Up to 6 devices per input
- Dip Switch configuration

- Infrared barrier detector
- Wired | 6 beams
- Max distance. The detection 100 m
- Easy installation with LED and buzzer
- NC/NO relay outputs
- Power supply 12~18VDC

- Infrared barrier detector
- Wired | 8 beams
- Max distance. The detection 30 m
- Easy installation with LED and buzzer
- NC/NO relay outputs
- Power supply 12~18VDC

- Infrared barrier detector
- Wired | 3 beams
- Max distance. detection 150 / 450 m
- High configuration capacity
- Tamper | Relay Outputs | LED Display
- Power supply 12~24VDC/VAC

- Infrared barrier detector
- Wired | 8 beams
- Max distance. The detection 100 m
- Easy installation with LED and buzzer
- NC/NO relay outputs
- Power supply 12~18VDC

- Solar infrared barrier receiver
- 8 wireless inputs
- 8 wired outputs
- Up to 6 devices per input
- Dip Switch configuration

- Pair of Politec infrared barrier detectors
- Wired | 2 beams
- Max distance. detection 60 / 250 m
- Maximum reliability with fog disqualification
- Tamper | Relay output
- Power supply 10~30VDC

- Solar infrared barrier repeater
- Up to 50 wireless devices
- Signal range up to 1000m
- Up to 4 sequential repeaters
- It allows to expand the coverage area

- Solar infrared barrier detector
- Completely wireless | 2 beams
- Signal range up to 1000m
- Max distance. 60m of detection
- Automatic regulation against interference
- Power 3.3V internal battery

- Politec Infrared Barrier Detector
- Wired | 2 pairs of beams
- Max distance. The detection 15 m
- Maximum reliability with fog disqualification
- Tamper | Relay output
- Power supply 12VDC

- Infrared barrier detector
- Wired | 4 beams | Function AND OR
- Max distance. detection 150 / 450 m
- High configuration capacity
- Tamper | Relay Outputs | LED Display
- Power supply 12~24VDC/VAC

- Infrared barrier detector
- Wired | 4 beams | Function AND OR
- Max distance. detection 250 / 750 m
- High configuration capacity
- Tamper | Relay Outputs | LED Display
- Power supply 12~24VDC/VAC

- Politec Infrared Barrier Detector
- Wired | 3 pairs of beams
- Max distance. The detection 15 m
- Maximum reliability with fog disqualification
- Tamper | Relay output
- Power supply 12VDC

- Dual Beam Selectable Frequency
- Photoelectric Detector is composed of a transmitter and a receiver. The receiver will alarm when the IR beAMS between the transmitter and the receiver are fully interrupted. Th…
Quality and price goes hand in hand
We at Sevecu are proud to offer a big product range within burglar alarms to private and professional use. We have several brand and it is not always easy to pick and prefer a brand if it is not something you work with every day. Our experience is that all products are very sensitive to quality. Therefore it is very important to keep in mind that quality and price goes hand in hand especially when it comes to burglar alarms.
Our recommendation is therefore
For private house owners we strongly recommend Chuango and Home8 burglar alarms mostly because both brands offer a lot value for money and because both brands are made of high quality. It is super to install which in other words means that you don’t have to be an IT expert in order to install it.
What are the main differences?
The main difference between the Home8 and Chuango burglar alarms is the pricing and functionality. Home8 is an American brand and require subscription via the App where Chuango does not require any subscription. Chuango Burglar alarms require either GSM (mobileline) or a PSTN (landline) as communication. However they also have a model that can work with both WiFi and GSM. We have put it together here:
Chuango Burglar Alarms:
- Chuango Burglar Alarm GO2 (Supports GSM)
- Chuango Burglar Alarm A11 (Supports PSTN)
- Chuango Burglar Alarm G5 (Supports GSM
- Chuango Burglar Alarm H4 (Supports WiFi and GSM)
- Chuango Burglar Alarm B11 (Support GSM and PSTN)
When it comes to Home8 the support options is narrower. As Home8 has focused only on developing burglar alarms that only require an internet connection.
For professionals
The requirements among business are often the security degree of the burglar alarm product. In order to know what degree of protection is required you need to consult that with your insurance company. Normally we would recommend Texecom and Pyronix for professionals.
If you don’t know what to choose you are always welcome to contact us.