IP extender coaxial cable | PoE - EOC-300-POE

SKU: EOC-300-POE

incl. VAT€89,51

Price incl. VAT: €89,51

Ex. VAT: €71,61

Total discount:

VAT: €17,90

SKU: EOC-300-POE
IP extender coaxial cable | PoE
Passive
Transmitter and receiver
Allows transmission 1 IP channel
Maximum distance 300 m (up to 500 m with DIP switch)
Bandwidth up to 100 Mbps

Sold out / Not on stock

Back to: IP solutions

Product description: EOC-300-POE

Description
Specification

IP PoE passive extender over coaxial cable.

Pair of extension devices with luminous state indicators that allow to transmit an IP channel and also power supply through coaxial cable, to make the installation of a new IP camera possible by reusing the cabling of an already existing analog camera.

Each extender/transceiver has an RJ45 Ethernet connection and a BNC connector for the coaxial cable which is the physical medium for the transmission.

The maximum distance between transceivers is 300M. The transmission rate allowed by the system is 100 Mbps, with the possibility of downloading it to 10 Mbps to reach a distance of 500 meters (accepting a reduction of the power supply transmitted to the camera). Both devices are passive and therefore do not require their own power supply.

SKU	EOC-300-POE
Connection over coaxial	BNC male/female connector
Power	Not required
PoE	IEEE802.3, IEEE 802.3u, IEEE 802.3af, 802.3at standard;
Datarate	10/100 Mbps with DIP switch
Distance over coaxial	300 m between extenders (500 m in case of transmission rate of 10 Mbps)
Ethernet connection	Port RJ45
Ethernet signal	10/100Mbps Base-T
Status indicators	Yellow: power OK \| Green: data connection OK \| Green flashing: Data transmission OK
Transmitted PoE Power	15.2 W to 300 meters of coaxial cable, 10.3 W to 500 meters of coaxial cable
Protection	Overvoltages up to 4 kV second IEC61000-4-5
Operating conditions	0℃~40℃ Temperature \| 95% Humidity
Dimensions	29 (H) x 45 (W) x 113 (D) mm / 58 g